Refine Your Search

Date

Date

Topic

Topic

Engine components Ferrous metals Piston and Ring Standards Committee Exhaust emissions

Search Results

Viewing 21 to 40 of 71
<< First< Previous1234Next >Last >>
Sort by relevance
Standard

Internal Combustion Engines—Piston Rings—Keystone Rings
1998-04-01
HISTORICAL
J2000_199804
Differences, where they exist, are shown in Appendix A. This SAE Standard specifies the essential dimensional features of T, TB, TM, K, KB, and KM keystone piston ring types. The requirements of this document apply to compression rings for reciprocating internal combustion engines up to and including 200 mm diameter.
Standard

INTERNAL COMBUSTION ENGINES - PISTON RINGS - KEYSTONE RINGS
1989-10-01
HISTORICAL
J2000_198910
Differences, where they exist, are shown in Appendix A. This document specifies the essential dimensional features of T, TB, TM, K, KB, and KM keystone piston ring types. The requirements of this document apply to compression rings for reciprocating internal combustion engines up to and including 200 mm diameter.
Standard

Internal Combustion Engines--Piston Rings--Scraper Rings
2008-06-30
CURRENT
J1999_200806
This SAE Standard specifies the essential dimensional features of N, NM, E, and EM scraper piston ring types. Dimensional Tables 7 and 8 offer the choice of two radial wall thicknesses: Radial wall thickness 'regular' (Table 7) Radial wall thickness 'D/22' (Table 8) The requirements of this document apply to scraper rings for reciprocating internal combustion piston engines up to and including 200 mm diameter. They may also be used for piston rings of compressors working under similar conditions.
Standard

INTERNAL COMBUSTION ENGINES - PISTON RINGS - SCRAPER RINGS
1989-10-01
HISTORICAL
J1999_198910
Differences, where they exist, are shown in Appendix A. This document specifies the essential dimensional features of N, NM, E, and EM scraper piston ring types. Dimensional Tables 7 and 8 offer the choice of two radial wall thicknesses: a radial wall thickness "regular" (Table 7); b radial wall thickness "D/22" (Table 8). The requirements of this document apply to scraper rings for reciprocating internal combustion piston engines up to and including 200 mm diameter. They may also be used for piston rings of compressors working under similar conditions.
Standard

Internal Combustion Engines—Piston Rings—Scraper Rings
1998-04-17
HISTORICAL
J1999_199804
Differences, where they exist, are shown in Appendix A. This SAE Standard specifies the essential dimensional features of N, NM, E, and EM scraper piston ring types. Dimensional Tables 7 and 8 offer the choice of two radial wall thicknesses: a Radial wall thickness "regular" (Table 7) b Radial wall thickness "D/22" (Table 8) The requirements of this document apply to scraper rings for reciprocating internal combustion piston engines up to and including 200 mm diameter. They may also be used for piston rings of compressors working under similar conditions.
Standard

Internal Combustion Engines—Piston Rings—Rectangular Rings
1998-04-01
HISTORICAL
J1997_199804
Differences, where they exist, are shown in Appendix A. This SAE Standard specifies the essential dimensional features of R, B, and M rectangular piston ring types. Dimensional Tables 8 and 9 offer the choice of two radial wall thicknesses: a Radial wall thickness "regular" (Table 8) b Radial wall thickness "D/22" (Table 9) The requirements of this document apply to rectangular rings for reciprocating internal combustion piston engines up to and including 200 mm diameter. They may also be used for piston rings of compressors working under similar conditions.
Standard

INTERNAL COMBUSTION ENGINES - PISTON RINGS - RECTANGULAR RINGS
1989-10-01
HISTORICAL
J1997_198910
Differences, where they exist, are shown in Appendix A. This document specifies the essential dimensional features of R, B, and M rectangular piston ring types. Dimensional Tables 8 and 9 offer the choice of two radial wall thicknesses: a radial wall thickness "regular" (Table 8) b radial wall thickness "D/22" (Table 9) The requirements of this document apply to rectangular rings for reciprocating internal combustion piston engines up to and including 200 mm diameter. They may also be used for piston rings of compressors working under similar conditions.
Standard

Internal Combustion Engines—Piston Rings— Rectangular Rings With Narrow Ring Width
1998-04-17
HISTORICAL
J1998_199804
Differences, where they exist, are shown in Appendix A. This SAE Standard specifies the essential dimensional features of R, B, and M rectangular piston ring types with narrow ring width. Dimensional Tables 8 and 9 allow for the use of cast iron (Table 8) or steel (Table 9). Since the modulus of elasticity of steel rings is higher than that of cast iron rings, the fluctuation in the surface pressure will become greater if the free gap is set as the reference for force. Therefore, forces are set using the surface pressure as the reference, in order to minimize the effect of the fluctuation. The requirements of this document apply to rectangular rings for reciprocating internal combustion engines up to and including 90 mm diameter for cast iron rings and up to and including 100 mm diameter for steel. They may also be used for piston rings of compressors working under similar conditions.
Standard

Internal Combustion Engines--Piston Rings--Rectangular Rings With Narrow Ring Width
2008-06-30
CURRENT
J1998_200806
This SAE Standard specifies the essential dimensional features of R, B, and M rectangular piston ring types with narrow ring width. Dimensional tables 8 and 9 allow for the use of cast iron (table 8) or steel (table 9). Since the modulus of elasticity of steel rings is higher than that of cast iron rings, the fluctuation in the surface pressure will become greater if the free gap is set as the reference for force. Therefore, forces are set using the surface pressure as the reference, in order to minimize the effect of the fluctuation. The requirements of this document apply to rectangular rings for reciprocating internal combustion engines up to and including 90 mm diameter for cast iron rings and up to and including 100 mm diameter for steel. They may also be used for piston rings of compressors working under similar conditions.
Standard

INTERNAL COMBUSTION ENGINES - PISTON RINGS -RECTANGULAR RINGS WITH NARROW RING WIDTH
1990-06-01
HISTORICAL
J1998_199006
Differences, where they exist, are shown in Appendix A. This SAE Recommended Practice specifies the essential dimensional features of R, B, and M rectangular piston ring types with narrow ring width. Dimensional Tables 8 and 9 allow for the use of cast iron (Table 8) or steel (Table 9). Since the modulus of elasticity of steel rings is higher than that of cast iron rings, the fluctuation in the surface pressure will become greater if the free gap is set as the reference for force. Therefore, forces are set using the surface pressure as the reference, in order to minimize the effect of the fluctuation. The requirements of this document apply to rectangular rings for reciprocating internal combustion engines up to and including 90 mm diameter for cast iron rings and up to and including 100 mm diameter for steel. They may also be used for piston rings of compressors working under similar conditions.
Standard

Internal Combustion Engines--Piston Rings--Rectangular Rings
2008-06-30
CURRENT
J1997_200806
This SAE Standard specifies the essential dimensional features of R, b, and M rectangular piston ring types. Dimensional tables 8 and 9 offer the choice of two radial wall thicknesses: a. radial wall thickness "regular" (table 8); b. radial wall thickness "D/22" (table 9). The requirements of this document apply to rectangular rings for reciprocating internal combustion piston engines up to and including 200 mm diameter. They may also be used for piston rings of compressors working under similar conditions.
Standard

INTERNAL COMBUSTION ENGINES - PISTON RINGS - OIL CONTROL RINGS
1989-10-01
HISTORICAL
J2002_198910
Differences, where they exist, are shown in Appendix A. This document specifies the dimensional features of S, G, D, and DV oil control piston ring types. The normal range for the axial width of oil control rings (2.5 to 8 mm inclusive) is divided into 0.5 or 1.0 increments. In Table 7, dimensions in inch units are given for oil control rings with axial width 4.75 mm (equal to 3/16 in) for existing applications. The requirements of this document apply to oil control rings for reciprocating internal combustion piston engines up to and including 200 mm in diameter. They may also be used for piston rings of compressors working under similar conditions.
Standard

Internal Combustion Engines—Piston Rings—Oil Control Rings
1998-04-01
HISTORICAL
J2002_199804
Differences, where they exist, are shown in Appendix A. This SAE Standard specifies the dimensional features of S, G, D, and DV oil control piston ring types. The normal range for the axial width of oil control rings (2.5 to 8 mm inclusive) is divided into 0.5 or 1.0 increments. In Table 7, dimensions in inch units are given for oil control rings with axial width 4.75 mm (equal to 3/16 in) for existing applications. The requirements of this document apply to oil control rings for reciprocating internal combustion piston engines up to and including 200 mm in diameter. They may also be used for piston rings of compressors working under similar conditions.
Standard

Internal Combustion Engines--Piston Rings--Oil Control Rings
2008-06-30
CURRENT
J2002_200806
This SAE Standard is equivalent to ISO Standard 6625. Differences, where they exist, are shown in Appendix A. This SAE Standard specifies the dimensional features of S, G, D, and DV oil control piston ring types. The normal range for the axial width of oil control rings (2.5 to 8 m inclusive) is divided into 0.5 or 1.0 increments. In Table 7, dimensions in inch units are given for oil control rings with axial width 4.75 m (equal to 3/16 in) for existing applications. The requirements of this document apply to oil control rings for reciprocating internal combustion piston engines up to and including 200 mm in diameter. They may also be used for piston rings of compressors working under similar conditions.
<< First< Previous1234Next >Last >>
X